Portable + PC

RastreCurve X one

Portable curve tracer with a 4″ screen, 2 to 32 Vpp signal, Multi, CircuitScan, Ic-Vce and PWM – plus Windows software.

2–32 Vpptest voltage, in 16 steps
1k–200k8 impedances + Brute Force
10–1000 Hztest frequency
4″ 480×320color screen

Launching soon. Leave your contact and we will let you know as soon as it is available.

The RastreCurve X one applies a controlled AC signal to a point of the circuit – with the board powered off – and draws on screen the relationship between the applied voltage and the current that flows: the point’s V-I signature. It compares both channels at the same time, calculates the percentage difference and tells whether the part passed.

It works in pulsed and continuous modes, with three waveforms (sine, triangle and soft sawtooth), and brings together the Curves, Multi, CircuitScan, Ic-Vce, PWM and bench tool functions in one device. On the computer, the Windows software brings every function to the big screen, plus projects with the board photo or PDF, TestFlow and test report.

Functions

Curves: V-I signature on two channels, with comparison, memory and test projects
Pulsed and continuous modes, with sine, triangle and soft sawtooth
Multi: the same point at four frequencies and impedances at once
CircuitScan: identifies the equivalent circuit – resistance, capacitance, inductance and junctions
Ic-Vce: curve families of bipolar transistors, MOSFET, JFET and IGBT
PWM: pulse generator from 1 Hz to 20 kHz, with adjustable amplitude and current
Brute Force: relay impedance for power components
Bench tools: intermittent, impedance with beeps, MOSFET/IGBT, generator, frequency sweep and guided routines
Windows software: every function on the PC, projects with the board photo or PDF, TestFlow and test report
Languages: Portuguese, English and Spanish

Specifications

Measurement channels	2 (Channel 1 and Channel 2), with common COM reference
Test voltage	2 to 32 Vpp, in 2 V steps
Series impedance	1k, 2k, 5k, 10k, 20k, 50k, 100k, 200k and Brute Force (relay)
Test frequency	10 to 1000 Hz in continuous mode • 10 to 300 Hz in pulsed mode
Waveforms	Sine • Triangle • Soft sawtooth
Curve resolution	65 points per period
Comparison	Percentage difference, adjustable limit from 2 to 20%
Projects on the device	Up to 25 test projects
Multi	4 simultaneous profiles (frequency and impedance per profile)
Ic-Vce	NPN, PNP, MOSFET N/P, JFET N/P, IGBT • 2 to 8 curves
PWM	1 Hz to 20 kHz • duty 1 to 99% • 2 to 32 V • 0.1 mA to 0.1 A • 10 profiles
Screen	4″ color, 480 × 320
Operation	4 buttons • Portuguese, English and Spanish
Maximum current	100 mA in Brute Force mode
Battery	2600 mAh, rechargeable via USB – about 4 h of use
Communication	USB
PC software	Windows 7 SP1, 8.1, 10 and 11